Need some help with my pacesetter eliminator!

Lets talk about 1/4 scale cars here!!
Post Reply
Viperkota318
Newbie
Posts: 7
Joined: June 24th, 2016, 5:47 pm

Need some help with my pacesetter eliminator!

Post by Viperkota318 »

Hey guys first post here. Just picked up this pacesetter eliminator from my neighbor for $100! He had no clue what it was, and neither did I until I researched it.

Few questions. I believe the motor is original. It says TML industrial motors. I HEARD is a 52cc motor?

So for short. My questions are this:

1. Is this motor the original one?
2. What size is it if it is original?
3. Were the zoomies available with this motor?
4. Was the throttle control a cable in this application?

Any comments or help would be great!
Al Gibson (QSL)
Legacy Member
Posts: 799
Joined: November 9th, 2013, 3:36 pm
Location: San Diego, CA
Contact:

Re: Need some help with my pacesetter eliminator!

Post by Al Gibson (QSL) »

can you post some pictures?
Viperkota318
Newbie
Posts: 7
Joined: June 24th, 2016, 5:47 pm

Re: Need some help with my pacesetter eliminator!

Post by Viperkota318 »

Im trying i upload pictures but it says too big?
Viperkota318
Newbie
Posts: 7
Joined: June 24th, 2016, 5:47 pm

Re: Need some help with my pacesetter eliminator!

Post by Viperkota318 »

Where these available with tml motors? Any help with uploading images?
User avatar
vwguru75
1/4 scale guru
Posts: 123
Joined: November 17th, 2013, 6:26 pm

Re: Need some help with my pacesetter eliminator!

Post by vwguru75 »

How are you doing with the pictures? It'll help a lot in identifying theparts you need.
Craig's List..............eBay for people that can't spell.
Viperkota318
Newbie
Posts: 7
Joined: June 24th, 2016, 5:47 pm

Re: Need some help with my pacesetter eliminator!

Post by Viperkota318 »

vwguru75 wrote:How are you doing with the pictures? It'll help a lot in identifying theparts you need.
Its says file size too large unfortunately . I mean If someone is really willing to help I could email you pictures? I just really need to know what I have here.
User avatar
Emilio
1/4 Scale Legend!
Posts: 1254
Joined: March 20th, 2014, 12:13 am

Re: Need some help with my pacesetter eliminator!

Post by Emilio »

If you're using a windows computer just open up the photo in "paint" chose "resize" "pixel" then choose 1600 X 900, if still too large just try a lower resolution, save photo under new name. Hope this helps.
Viperkota318
Newbie
Posts: 7
Joined: June 24th, 2016, 5:47 pm

Re: Need some help with my pacesetter eliminator!

Post by Viperkota318 »

Im actually on my phone. ZTE warp.
Post Reply