New Member from Connecticut USA

If you are a new member, introduce yourself here.
Post Reply
Bill Rittner
Newbie
Posts: 5
Joined: November 1st, 2015, 1:00 pm

New Member from Connecticut USA

Post by Bill Rittner »

Hello all. Thank you for accepting me into your group. I hope to learn a lot from this forum and also to contribute some. I am semi-retired. I served 2 apprenticeships in machining and toolmaking and have worked in the machine trades since 1965. I still work as the inspection manager for a small cnc machine shop. I have never built a radio controlled car but have flown radio control planes back in the 1970's. I have been an avid scale car model builder since I was a child. I have a lathe and an old bench top mill/drill that I am currently putting on cnc control. My plan is to build model internal combustion engines. I really look forward to building a 1/4 scale rc hotrod.
Al Gibson (QSL)
Legacy Member
Posts: 799
Joined: November 9th, 2013, 3:36 pm
Location: San Diego, CA
Contact:

Re: New Member from Connecticut USA

Post by Al Gibson (QSL) »

Bill
Welcome to QSL! Please look at putting your capabilities in the form for craftsman if you wish to help others out. There are many great craftsmen and knowledgeable hobbyist here on this site. I am sure you will get all the help that you are looking to get. Al
Post Reply