750CC and 16" long this dude could be used to destroy the world. The crank output shaft is 3/4"
this thing is a monster.
750cc V12 Model engine
- Mike Casey
- Legacy Member
- Posts: 4181
- Joined: December 28th, 2004, 9:28 pm
- Location: Corona, CA
- Contact:
Re: 750cc V12 Model engine
I have seen this engine before. is this a working/running engine? if so, I have the prefect project. mike do you own this baby?
- Mike Casey
- Legacy Member
- Posts: 4181
- Joined: December 28th, 2004, 9:28 pm
- Location: Corona, CA
- Contact:
Re: 750cc V12 Model engine
It has not been run yet, but it is a working model. There are two more boxes to it. Flywheel parts and a ignition system! The quality looks to be outstanding. Much better then i imagined!
www.quarterscalelegends.com The Awesome history of 1/4 scale!!
- Mike Casey
- Legacy Member
- Posts: 4181
- Joined: December 28th, 2004, 9:28 pm
- Location: Corona, CA
- Contact:
Re: 750cc V12 Model engine
both are here, will post pics when i get home.
www.quarterscalelegends.com The Awesome history of 1/4 scale!!
- Mike Casey
- Legacy Member
- Posts: 4181
- Joined: December 28th, 2004, 9:28 pm
- Location: Corona, CA
- Contact:
Re: 750cc V12 Model engine
had this 1/3 scale 32 project hiding here at the shop. Thought i would throw the body near the engine. Hmmmmm, body looks a little small for this one. Looks like this guy is going to need a 40% scale car.... Hmmmmm, might have something in the living room that might fit this...
www.quarterscalelegends.com The Awesome history of 1/4 scale!!
- Mike Casey
- Legacy Member
- Posts: 4181
- Joined: December 28th, 2004, 9:28 pm
- Location: Corona, CA
- Contact:
Re: 750cc V12 Model engine
here are a few much better shots. Next to a conley for size comparison. I also put the 1/3 scale v8 next to it.
Last pic is showing the engine on top of my 40% scale indy car. If the chassis was modified, this engine would sit 5" or so lower... maybe clearing the cowl. It would be a tight fit, but could look sooooooo sweeet!!!
Last pic is showing the engine on top of my 40% scale indy car. If the chassis was modified, this engine would sit 5" or so lower... maybe clearing the cowl. It would be a tight fit, but could look sooooooo sweeet!!!
www.quarterscalelegends.com The Awesome history of 1/4 scale!!
-
- 1/4 scale guru
- Posts: 349
- Joined: August 5th, 2009, 1:10 pm
- Location: Hamilton New Zealand