G2D Engine Rebuilding

Post anything here that has to do with 1/4 scale engines and tuning.
Post Reply
User avatar
Venomusss
1/4 scale guru
Posts: 120
Joined: February 17th, 2010, 6:44 pm
Location: Sunrise, Florida
Contact:

G2D Engine Rebuilding

Post by Venomusss »

I am going through 8 or 9 G2D motors that have come with various Raco cars I have purchased.
I'm checking all the specs of the motors and replacing whatever parts are not in spec.
I am using a soda blaster on the crankcase and heads once assembled and then a light polishing on the crankcase.
The soda blaster gives a great finish to the heads. I will post more photos as I go along.

Image

Image
MadMike
Newbie
Posts: 28
Joined: August 5th, 2009, 1:51 pm

Re: G2D Engine Rebuilding

Post by MadMike »

Is that a handle in the sparkplug hole? what a cool idea!!
User avatar
Venomusss
1/4 scale guru
Posts: 120
Joined: February 17th, 2010, 6:44 pm
Location: Sunrise, Florida
Contact:

Re: G2D Engine Rebuilding

Post by Venomusss »

It's a Piston Stop Tool. It locks the piston so you can take off the clutch and flywheel bolts. I leave it in while I work on the engine to keep dirt out and as you said... It makes a great handle... :D


MadMike wrote:Is that a handle in the sparkplug hole? what a cool idea!!
whozenext
Newbie
Posts: 22
Joined: August 5th, 2009, 5:18 pm

Re: G2D Engine Rebuilding

Post by whozenext »

Hello,
Cool result with the polishing. Would like to know where do you purchase the parts?
Cheers.
Whoz.
Post Reply