Will this engine work for a quarter scale topfuel dragster?

Post anything here that has to do with 1/4 scale engines and tuning.
Post Reply
DirtbikeRider
Newbie
Posts: 4
Joined: August 24th, 2014, 9:00 pm

Will this engine work for a quarter scale topfuel dragster?

Post by DirtbikeRider »

I took the suggestion of some people on my last post about an engine. So I went and looked. I found some engines that I thought would work just fine but I'd rather be safe than sorry. So will any of these engines work?

http://www.davesmotors.com/Zenoah-G320R ... plete.html

http://www.davesmotors.com/zenoah-g290r ... 5ive-.html

http://www.davesmotors.com/zenoah-g290r ... 0-290.html

Any of those work? If so what one would be the best. Or if there are any others on the web sight that you would recommend for a quarter scale top fuel dragster. Please let me know. Thanks!
Al Gibson (QSL)
Legacy Member
Posts: 799
Joined: November 9th, 2013, 3:36 pm
Location: San Diego, CA
Contact:

Re: Will this engine work for a quarter scale topfuel dragst

Post by Al Gibson (QSL) »

DirtbikeRider
Newbie
Posts: 4
Joined: August 24th, 2014, 9:00 pm

Re: Will this engine work for a quarter scale topfuel dragst

Post by DirtbikeRider »

What kind of rear end or rear axle do you have in your car?
Al Gibson (QSL)
Legacy Member
Posts: 799
Joined: November 9th, 2013, 3:36 pm
Location: San Diego, CA
Contact:

Re: Will this engine work for a quarter scale topfuel dragst

Post by Al Gibson (QSL) »

DirtbikeRider

I have a John Foster Quick change rear. Al

www.quartermortar.com
Post Reply