Page 1 of 1

Will this engine work for a quarter scale topfuel dragster?

Posted: August 26th, 2014, 2:19 pm
by DirtbikeRider
I took the suggestion of some people on my last post about an engine. So I went and looked. I found some engines that I thought would work just fine but I'd rather be safe than sorry. So will any of these engines work?

http://www.davesmotors.com/Zenoah-G320R ... plete.html

http://www.davesmotors.com/zenoah-g290r ... 5ive-.html

http://www.davesmotors.com/zenoah-g290r ... 0-290.html

Any of those work? If so what one would be the best. Or if there are any others on the web sight that you would recommend for a quarter scale top fuel dragster. Please let me know. Thanks!

Re: Will this engine work for a quarter scale topfuel dragst

Posted: August 26th, 2014, 5:33 pm
by Al Gibson (QSL)

Re: Will this engine work for a quarter scale topfuel dragst

Posted: August 28th, 2014, 2:36 pm
by DirtbikeRider
What kind of rear end or rear axle do you have in your car?

Re: Will this engine work for a quarter scale topfuel dragst

Posted: August 28th, 2014, 4:54 pm
by Al Gibson (QSL)
DirtbikeRider

I have a John Foster Quick change rear. Al

www.quartermortar.com