Page 1 of 1
Low budget rim with some bling
Posted: December 30th, 2017, 3:07 pm
by RcBurnout
Fooling around with some aluminum inserts for the old WCM aluminum rims. My plastic ones are awesome but just want to try something new. I think this is as far as I'm going to go with these.
Imagination feeds creativity
Re: Low budget rim with some bling
Posted: December 31st, 2017, 12:20 pm
by RcBurnout
Ok. Low budget rim with some bling. Got the numbers straight and number 2 is done. 2 to go. A little behind the scenes for you guys that refuse to buy 1000.00 rims but want a little bling. Hope this helps.
Re: Low budget rim with some bling
Posted: December 31st, 2017, 12:27 pm
by RcBurnout
Won't let me post some behind the scene pics.
Re: Low budget rim with some bling
Posted: January 1st, 2018, 6:46 am
by RcBurnout
Simple process. A little drawing. A little math. Some drilling and a quick turn on the lathe to keep it all trued up.
Keep it simple.
Re: Low budget rim with some bling
Posted: January 2nd, 2018, 6:11 pm
by RcBurnout
Did the rears today. The rear inserts are 1/2 inch thick. Changed the design just a little
Low budget sprintcar rims.