How to make a 4 stroke more HP
-
- Newbie
- Posts: 65
- Joined: February 27th, 2010, 4:09 pm
- Location: brisbane australia
How to make a 4 stroke more HP
G'day I have a Honda GX25 and I was just wondering what I can do to make it have for HP.
Could I do anything with the carby???
Cheers James
Could I do anything with the carby???
Cheers James
-
- 1/4 scale guru
- Posts: 349
- Joined: August 5th, 2009, 1:10 pm
- Location: Hamilton New Zealand
Re: How to make a 4 stroke more HP
biger carb ,biger valves , cam timing , higher lift cam, roller rockers lol, up the compresion ,run av gas , ...
been looking for one of these for a project too will be intersting what ya can get out of it ..
been looking for one of these for a project too will be intersting what ya can get out of it ..
-
- Newbie
- Posts: 65
- Joined: February 27th, 2010, 4:09 pm
- Location: brisbane australia
Re: How to make a 4 stroke more HP
Thanks mate, I was thinking about running it on methanol I have two of them, I have a brand new one that im gonna run in my late model and the older engine is gonna be the test engine
-
- 1/4 scale guru
- Posts: 349
- Joined: August 5th, 2009, 1:10 pm
- Location: Hamilton New Zealand
Re: How to make a 4 stroke more HP
ok i would get a biger carb one off a chainsaw maybe do a bit of porting in the head inlet and exhaust ..to start with
-
- Newbie
- Posts: 65
- Joined: February 27th, 2010, 4:09 pm
- Location: brisbane australia
Re: How to make a 4 stroke more HP
Thanks mate, pulled the old engine down in about 10mins lol. Tomorrow I am going to enlarge the inlet and outlet And get a larger carby. Is there any where I can get it dynoed?
Re: How to make a 4 stroke more HP
Bonjours,
We in Europe, we work for 2 years on the GX35, it has more torque!
Work ignition (CDI), the original is not good to use RC.
Jean Phi
We in Europe, we work for 2 years on the GX35, it has more torque!
Work ignition (CDI), the original is not good to use RC.
Jean Phi
-
- 1/4 scale guru
- Posts: 349
- Joined: August 5th, 2009, 1:10 pm
- Location: Hamilton New Zealand
Re: How to make a 4 stroke more HP
jean what ignition did you change to ??? and what spark plug are you using ??
i just bought a gx35 for a project (been looking for one for ages)
i just bought a gx35 for a project (been looking for one for ages)
Re: How to make a 4 stroke more HP
Hello,.
I changed CDI Honda by a CDI Zenoah (2 time).
Then he must remove the PIN on the motor wheel and give advance ignition (+ 5 °).
Attention the best engine performance is achieved only after 50 hours of use (long running).
If you want, j have a Carbon/kevlar ventilation carter.
For info I work in collaboration with HONDA EUROPE!
Jean Phi
I changed CDI Honda by a CDI Zenoah (2 time).
Then he must remove the PIN on the motor wheel and give advance ignition (+ 5 °).
Attention the best engine performance is achieved only after 50 hours of use (long running).
If you want, j have a Carbon/kevlar ventilation carter.
For info I work in collaboration with HONDA EUROPE!
Jean Phi
-
- 1/4 scale guru
- Posts: 349
- Joined: August 5th, 2009, 1:10 pm
- Location: Hamilton New Zealand
Re: How to make a 4 stroke more HP
thanks for the info jean will see how i go with it
Re: How to make a 4 stroke more HP
Hi Bents, i've been reading up about these engines too.
Some of the mods people do are.
Replace the GX-35 cam with a GX-25 cam
Replace the GX-35 piston with GX31 piston
Here's a link. http://www.rcuniverse.com/forum/m_71680 ... tm#9462740
Some of the mods people do are.
Replace the GX-35 cam with a GX-25 cam
Replace the GX-35 piston with GX31 piston
Here's a link. http://www.rcuniverse.com/forum/m_71680 ... tm#9462740
-
- 1/4 scale guru
- Posts: 349
- Joined: August 5th, 2009, 1:10 pm
- Location: Hamilton New Zealand
Re: How to make a 4 stroke more HP
intersting stuff in that thanks smurf
what are you putin g one in ???
what are you putin g one in ???
Re: How to make a 4 stroke more HP
I'd like to put it in my drifter.....when i finish it lol, have you put one in a car yet?
-
- 1/4 scale guru
- Posts: 349
- Joined: August 5th, 2009, 1:10 pm
- Location: Hamilton New Zealand
Re: How to make a 4 stroke more HP
no should be here today ....but i still have to build a chassis for it and finish the diff im building for it
Re: How to make a 4 stroke more HP
We modified the wheel of ignition, a Honda Gx 25 wheel mounting.
Much easier to use, because we can now use a 54 mm and standard Bell clutch.
Jean Phi
Much easier to use, because we can now use a 54 mm and standard Bell clutch.
Jean Phi