www.Quarterscalelegends.com

I am putting a LOT in storage right now. It appears there are a ton of parts that i will not need.

-engines and engine parts
-tuned pipes
-wings
-bearings and hardware
-misc panels
-shocks
-wheels
-tires
-hubs
-sway bars
-clutches, bell housings
-brake parts
-MORE

Would anyone be interested in a large like this if offered? I dont want to go through seperating the items and taking pictures to just find out i should have put it in storage. I need it out of here pretty quick.

here are a couple shots of the parts compiled so far. Still have some bins to go through. Better and more complete pics to follow tomorrow night. I need this stuff gone asap. Either sold or it all goes into storage next weekend. Not looking to part it out.

Ok, with alyssa's help we finally got everything out of the cabinets. There are new tires here, Box full of new Yankee parts including a complete front and rear end upgrade that cost $400. Sway bars, bulldog hubs, bulldog wheel spares (see side of containers to understand whats inside them), skellenger knock off parts, degree gear reduction boxes and spare parts, new raco indy and gtp arms (84pcs) Used A arms from all sorts of cars, spindles, hubs, shocks, springs, new wings, used wings, GTP wings, indy wings, Engines, Engine parts, clutches, bell housings clutch housings, brake setups, tuned pipes, Conley parts Tons and Tons of stuff here.

I walked around the lot a few times and did a rough total of what this stuff is worth. I did it three times to make sure the number i came up with was consistent. Conservatively there is over $12,000 of parts here. It adds up very fast. Take the new A arms for instance. Easly worth $25 each and there are 84 of them. Tires are new. Figure $100 a set and there are over 5 sets there. Clutch housings run about $40 each so do the math on those. I am just saying, it all adds up very fast and i was not even that careful. I think there is about $1200 in engines and parts there, etc, etc, etc.

So i am putting this lot out there available to whoever wants to submit a very fair offer, but i am not giving it away. If you need more pics or clarification of something you see, let me know. I will have it out until thursday night and then its getting packed up to be put in storage saturday.

raco indy cantilevers. Yep, there is a lot of those

spindles and trailing arms.

pilot with broken leg, new OLD stock racing suit.

bulldog wheel half spares and misc centers. probably not a full set here, just misc stuff. Also note all the new gtp and indy arms in the box.

frames and tires. most of these tires are new. New sprint wings too.

more bulldog knock off hubs, exhaust parts and a BOX full of pacesetter starter shafts that were used on their dragsters (box with orange looking part in it) they are missing the one way bearing and belt pully though.

motor parts, pacesetter jack shafts, front hubs.

bulldog hubs, raco gearbox shafts, tire balancer

axles, clutches, sway bars, front axles, axle flags, clutch housings, raco JR aluminum rear arm parts, degree gear reduction boxes and parts.

close up of gear reduction parts, misc box of parts including raco JR front axles, box full of degree misc. parts.

shocks and shock parts, clutch bells, raco panels, drive cups, dog bones.

new servo arms, misc raco used a arms and such, misc hubs.