www.Quarterscalelegends.com

hi everyone i am new to the site and 1/4 scale in general i am attemting a raco supermod resto the car was 90% complete when i got it i am in need of some help though 1., where can i get a new clutch and maybe clutchbell still the stock zenoah g2b 2., the front tires are shot they are the 2 inch wides what is the best replacement for these 3.,the rear tires appear to be slicks but had a band glued to the outside , I removed the band and am in the proccess of cleaning the old glue can these be ran like that or do they need bands thanks . sorry to sound dumb but 1/10 scale is all off the shelve 1/4 scale is more hand built and personal whichis what drew me to it thanks for your time

Look up the Guys at BRP they'll have tires for you

Clutch can be found a Dave's Discount Motors. If your Rims are 4" Diameter BRP will have tires for you. If you have the most common 3" Diameter rims, then BRP can't help you. I am looking for the same tires you are for 3" rims...... If you find some let me know.

thanks for the help guys another quick question what is the best way to remove the front tires well the little bit that is left

To get the old tire off try soaking the tire and rim in paint thinner for a few hours. The foam will almost fall off of the rim.

I have not done this with the chrome plated rims so I don’t know if it will cause the plating to release from the nylon rim.